Faraday Copper Intersects 117.00 Metres at 0.40% Copper Near Surface, Including 23.37 Metres at 0.60% Copper at Old Reliable and Drilling Success Continues at Area 51

VANCOUVER, BC / ACCESSWIRE / April 10, 2024 / Faraday Copper Corp. ("Faraday" or the "Company") (TSX:FDY)(OTCQX:CPPKF) is pleased to announce the results of four drill holes from its Phase III program at the Copper Creek Project, located in Arizona, U.S. ("Copper Creek"). One hole was drilled at Old Reliable to test resource expansion potential. Three holes were drilled at Area 51 as a follow-up to the recent Starship and Eclipse breccia discoveries (announced on January 16, 2024 and March 4, 2024).

Paul Harbidge, President and CEO, commented "It is great to see our Phase III drill program delivering on our objectives of adding mineral inventory near the existing resource and making new discoveries in the district. Specifically, drilling at Old Reliable has confirmed that the mineralization remains open at depth. At Area 51, drill hole FCD-24-048 at the Eclipse breccia adds to the previous successes by expanding the known mineralization and drill hole FCD-24-049 has identified elevated gold grades at the Starship breccia".

Highlights

• At Old Reliable, intersected 23.37 metres ("m") at 0.60% copper, 0.0242% molybdenum and 2.92 grams per tonne ("g/t") silver from 276.81 m in drill hole FCD-24-052. This intercept is within a longer intercept of 117.00 m at 0.40 % copper, 0.0285% molybdenum and 1.72 g/t silver from 222.46 m.
  • This intercept at Old Reliable is outside the open pit Mineral Resource Estimate ("MRE") and confirms that the breccia-hosted mineralization is open at depth.
• At Area 51, intersected 43.24 m at 0.35% copper and 0.83 g/t silver from 65.23 m in drill hole FCD-24-048 at the recently discovered Eclipse breccia. This hole expands the known mineralization of the breccia.
  • Demonstrated the potential for elevated gold grades at the Starship breccia with 0.22 g/t gold, 1.86 g/t silver and 0.12% copper over 18.52 m from 113.24 m in drill hole FCD-24-049. This intercept contains the highest gold:copper ratio on the project to date.

(For true width information see Table 1.)

Figure 1: Plan View Showing Surface Geology and Location of Drill Holes

Figure 2: Cross Section Showing Drill Hole FCD-24-052 at Old Reliable

_{Note: The open pit shape is based on constraints used in the MRE as presented in the report titled "Copper Creek Project NI 43-101 Technical Report and Preliminary Economic Assessment" with an effective date of May 3, 2023 (the "Technical Report") available on the Company's website at www.faradaycopper.com and on the Company's SEDAR+ profile at www.sedarplus.ca.}

Figure 3: Cross Section Showing Drill Hole FCD-24-048 at Area 51

Table 1: Selected Drill Results from Copper Creek

_{Note: All intercepts are reported as downhole drill widths. True widths are approximate due to the irregular shape of mineralized domains.}

Table 2: Collar Locations from the Drill Holes Reported Herein

_{Note: Coordinates are given as World Geodetic System 84, Universal Transverse Mercator Zone 12 north (WGS84, UTM12N).}

Next Steps

Phase III drilling continues and is focussed on three objectives:

• Reconnaissance drilling on new targets;
• Expanding the MRE; and
• Better delineating high-grade mineralized zones.

As part of the Phase III program, twenty-one drill holes have been completed and results for fourteen have been released. Eight holes were drilled in Area 51, three in the Copper Prince-Copper Giant area, three in the Bald-American Eagle area and three near Old Reliable. Additional holes are currently being designed to further test Area 51 and other high priority target areas.

Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance

All sampling was conducted under the supervision of the Company's geologists and the chain of custody from Copper Creek to the independent sample preparation facility, ALS Laboratories in Tucson, AZ, was continuously monitored. The samples were taken as ½ core, over 2 m core length. Samples were crushed, pulverized and sample pulps were analyzed using industry standard analytical methods including a 4-Acid ICP-MS multielement package and an ICP-AES method for high-grade copper samples. Gold was analyzed on a 30 g aliquot by fire assay with an ICP-AES finish. A certified reference sample was inserted every 20^th sample. Coarse and fine blanks were inserted every 20^th sample. Approximately 5% of the core samples were cut into ¼ core and submitted as field duplicates. On top of internal QA-QC protocol, additional blanks, reference materials and duplicates were inserted by the analytical laboratory according to their procedure. Data verification of the analytical results included a statistical analysis of the standards and blanks that must pass certain parameters for acceptance to ensure accurate and verifiable results.

Qualified Person

The scientific and technical information contained in this news release has been reviewed and approved by Faraday's VP Exploration, Dr. Thomas Bissig, P. Geo., who is a Qualified Person under National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101").

About Faraday Copper

Faraday Copper is a Canadian exploration company focused on advancing its flagship copper project in Arizona, U.S. The Copper Creek Project is one of the largest undeveloped copper projects in North America with significant district scale exploration potential. The Company is well-funded to deliver on its key milestones and benefits from a management team and board of directors with senior mining company experience and expertise. Faraday trades on the TSX under the symbol "FDY".

For additional information please contact:

Stacey Pavlova, CFA
Vice President, Investor Relations & Communications
Faraday Copper Corp.
E-mail: info@faradaycopper.com
Website: www.faradaycopper.com

To receive news releases by e-mail, please register using the Faraday website at www.faradaycopper.com.

Cautionary Note on Forward Looking Statements

Some of the statements in this news release, other than statements of historical fact, are "forward-looking statements" and are based on the opinions and estimates of management as of the date such statements are made and are necessarily based on estimates and assumptions that are inherently subject to known and unknown risks, uncertainties and other factors that may cause actual results, level of activity, performance or achievements of Faraday to be materially different from those expressed or implied by such forward-looking statements. Such forward-looking statements and forward-looking information specifically include, but are not limited to, statements concerning the exploration potential of the Copper Creek property.

Although Faraday believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements should not be in any way construed as guarantees of future performance and actual results or developments may differ materially. Accordingly, readers should not place undue reliance on forward-looking statements or information.

Factors that could cause actual results to differ materially from those in forward-looking statements include without limitation: market prices for metals; the conclusions of detailed feasibility and technical analyses; lower than expected grades and quantities of mineral resources; receipt of regulatory approval; receipt of shareholder approval; mining rates and recovery rates; significant capital requirements; price volatility in the spot and forward markets for commodities; fluctuations in rates of exchange; taxation; controls, regulations and political or economic developments in the countries in which Faraday does or may carry on business; the speculative nature of mineral exploration and development, competition; loss of key employees; rising costs of labour, supplies, fuel and equipment; actual results of current exploration or reclamation activities; accidents; labour disputes; defective title to mineral claims or property or contests over claims to mineral properties; unexpected delays and costs inherent to consulting and accommodating rights of Indigenous peoples and other groups; risks, uncertainties and unanticipated delays associated with obtaining and maintaining necessary licenses, permits and authorizations and complying with permitting requirements, including those associated with the Copper Creek property; and uncertainties with respect to any future acquisitions by Faraday. In addition, there are risks and hazards associated with the business of mineral exploration, development and mining, including environmental events and hazards, industrial accidents, unusual or unexpected formations, pressures, cave-ins, flooding and the risk of inadequate insurance or inability to obtain insurance to cover these risks as well as "Risk Factors" included in Faraday's disclosure documents filed on and available at www.sedarplus.ca.

This press release does not constitute an offer to sell or a solicitation of an offer to buy any securities in any jurisdiction to any person to whom it is unlawful to make such an offer or solicitation in such jurisdiction. This press release is not, and under no circumstances is to be construed as, a prospectus, an offering memorandum, an advertisement or a public offering of securities in Faraday in Canada, the United States or any other jurisdiction. No securities commission or similar authority in Canada or in the United States has reviewed or in any way passed upon this press release, and any representation to the contrary is an offence.

SOURCE: Faraday Copper Corp.